Auslogics 這間軟體公司一直都有許多還不錯的軟體，現在連備份軟體都有囉！主要針對檔案類型的備份，讓大家可以排程備份電腦裡的檔案。若是以檔案類型的備份軟體...
列表文章資訊參考來源
MakerBot SKETCH Large Single Printer Setup
2022年10月17日 — Leverage the printer's full print chamber and print up to 8.6” in length, 7.8” in width and almost 10” in height! ...（以下省略）
** 本站引用參考文章部分資訊，基於少量部分引用原則，為了避免造成過多外部連結，保留參考來源資訊而不直接連結，也請見諒 **
-
Larger Build Size. Print up to 11.6″ x 7.6″ x 6.3″ – 25% larger than the original MakerBot Replicator, for printing a bi...
-
Made from PC ABS, Makerbot Replicator+ is built with powder-coated steel reinforcement. It has a build volume of 29.5 X ...
-
Easy and reliable 3D printers. Whatever the size and needs of your classroom, school, or district – there is a MakerBot ...
-
252 x 199 x 150 mm (9.9 x 7.8 x 5.9 in.) Layer Resolution Low, 400 micron (0.016 in.) Layer Resolution High, 100 micron ...
-
2022年11月9日 — Our software expects units to be set to millimeters, so make sure that your modeling software is also set...
-
2020年4月8日 — The MakerBot Replicator+ has a physical outer height of 16.2” (41 cm), width of 20.8” (52.8 cm), and depth...
-
-
2022年10月17日 — Leverage the printer's full print chamber and print up to 8.6” in length, 7.8” in width and almost 10” i...
-
Specification ; SIZE & WEIGHT. PRODUCT DIMENSIONS, 52.8 L X 44.1 W X 41.0 H CM ; MECHANICAL. CONSTRUCTION, PC ABS WI...
makerbot size 參考影音
繼續努力蒐集當中...