若不是有跨網段的需求,其實static route用到的機會少之又少,畢竟一般人所處的環境是簡單不過了!一般的狀況下,大家只會有區域網路的routing,再來則...
列表文章資訊參考來源
識別OSPF 如何在一般區域中插入預設路由
2024年2月23日 — 由於路由器具有預設路由,因此路由器10.2.2.2建立的是鏈路ID為0.0.0.0的第5類LSA。這是命令在其OSPF配置中的結果 default-information originate 。 r10. ...(以下省略)
** 本站引用參考文章部分資訊,基於少量部分引用原則,為了避免造成過多外部連結,保留參考來源資訊而不直接連結,也請見諒 **
-
iT 邦幫忙是IT 領域的技術問答與分享社群,透過IT 人互相幫忙,一起解決每天面臨的靠北時刻。一起來當IT 人的超級英雄吧,拯救下一個卡關的IT 人.
-
2017年11月18日 — With this simple topology of 2 Cisco routers, we will configure default route in OSPF. The scenario is i...
-
This lesson explains how you can configure a default route for OSPF on Cisco IOS devices and how to verify this.
-
The default route or the Gateway of Last Resort is used to forward packets if our destination IP address does not have a...
-
-
2024年2月23日 — 由於路由器具有預設路由,因此路由器10.2.2.2建立的是鏈路ID為0.0.0.0的第5類LSA。這是命令在其OSPF配置中的結果 default-information originate 。 r10.
-
This document shows how Open Shortest Path First (OSPF) injects a default route into a normal area. Default routes injec...
-
2022年11月13日 — Default Route Propagation method supported by OSPF is to learn and redistribute default routes. OSPF req...
-
To propagate a default route with OSPF, use the default-information originate configuration command: Router1# configure ...
ospf default route 參考影音
繼續努力蒐集當中...