又來開箱啦!到底要多少 NAS 才夠我用?這個謎底日後再跟大家分享我的使用方式,這次和大家分享的是 Synology DS1813+ 的網路儲存伺服器,這台的型...
列表文章資訊參考來源
![channel-group 1 mode active vs on](https://i0.wp.com/host.easylife.tw/pics/201308/DS1813plus/DS1813plus_01.jpg?resize=409,215)
Cisco 2960鏈路聚合(LACP)
2023年12月8日 — 最後啟用port-channel 1 指令: (config-if-range)# channel-group 1 mode active. 統整: 要在2960上做LACP至少需要上面六個步驟,統一將指令用法歸納 ... ...(以下省略)
** 本站引用參考文章部分資訊,基於少量部分引用原則,為了避免造成過多外部連結,保留參考來源資訊而不直接連結,也請見諒 **
-
2023年12月8日 — 最後啟用port-channel 1 指令: (config-if-range)# channel-group 1 mode active. 統整: 要在2960上做LACP至少需要上面六個步驟,統一將指令用法...
-
2012年2月13日 — Active:會進入主動協商狀態,端口會通過發送LCAP ... CS1(config-if-range)#channel-group 1 mode ? ... Port-channel = Po1 GC = ...
-
channel-group 1 mode active. 1.建立etherchannel虛擬介面 2.指派實體介面加入該etherchannel 3. mode 後方如為active 則為支援LACP, ...
-
A.- When a port is configured in a group-channel as Active LACP mode, it means that the port will actively send LACP neg...
-
2020年9月9日 — The port in active mode negotiates with the other side to form Etherchannel while the interface in passive...
-
然後,兩邊都用channel-group 1 mode on 把Port 放進同一個Group 中,1 這個數字叫做Channel Group Number,可設定1-256,兩隻Switch 的Channel Group Number 不...
-
然後,两边都用channel-group 1 mode on 把Port 放进同一个Group 中,1 这个数字叫做Channel Group Number,可设定1-256,两只Switch 的Channel Group Number 不...
-
2021年3月14日 — 當我們對EtherChannel group設定時,會同時改到channel group裡面所有的port,也就是說channel group 1裡面有fa0/1,fa0/2,我改channel group 1...
-
Hello,. What is the advantage of enabling LACP or not? Our backbone is 6 3750 stacked together. The Access switch are 37...
-
2010年12月24日 — ... channel-group 1 mode on. switchport mode trunk ! interface FastEthernet0/24. channel-group 1 mode on...
channel-group 1 mode active vs on 參考影音
繼續努力蒐集當中...