常常與大家分享 Synology 的 NAS，很多機種都支援 Link Aggregation 的應用，一個系統只有有兩張網卡，要設定多張網卡 Bonding ...
列表文章資訊參考來源
Set Up PVID on a Port
Enter the configuration mode for the interface. TOR-1 SEFOS# configure terminal TOR-1 SEFOS(config)# interface extreme-ethernet 0/1 TOR-1 SEFOS(config-if)# ...（以下省略）
** 本站引用參考文章部分資訊，基於少量部分引用原則，為了避免造成過多外部連結，保留參考來源資訊而不直接連結，也請見諒 **
-
Configure the PVID of the port(s). By default, it is 1. vlan-id: The default VLAN ID of the port with the values between...
-
2015年6月6日 — Where PVID comes in is for ports that support both tagged and untagged packets (for example phone and comp...
-
Use port trunk pvid to configure the PVID for the trunk port. Use undo port ... The configuration made in port group vie...
-
You can configure a port connected to a network device or user terminal as a hybrid port. PVID. By default, VLAN 1 is th...
-
2017年7月27日 — 1.PVID(Port VLAN ID) Untag的port可以轉發哪個VLAN的封包(如果是Tag por…
-
2024年1月12日 — To configure the port VLAN ID (PVID) for a single port or the same PVID for a group of ports using the In...
-
2021年2月27日 — The undo port trunk pvid vlan command restores the default VLAN of a trunk interface to the default setti...
-
Enter the configuration mode for the interface. TOR-1 SEFOS# configure terminal TOR-1 SEFOS(config)# interface extreme-e...
-
A Port VLAN ID (pvid) is a default VLAN ID that is assigned to an access port to designate the virtual LAN segment to wh...
port pvid configuration 參考影音
繼續努力蒐集當中...