若不是有跨網段的需求，其實static route用到的機會少之又少，畢竟一般人所處的環境是簡單不過了！一般的狀況下，大家只會有區域網路的routing，再來則...
列表文章資訊參考來源
4.4. Configuring Static Routes with ip commands
As a system administrator, you can configure static routes using the ip route command. To display the IP routing table, use the ip route command. For example:. ...（以下省略）
** 本站引用參考文章部分資訊，基於少量部分引用原則，為了避免造成過多外部連結，保留參考來源資訊而不直接連結，也請見諒 **
-
2014年4月22日 — 上圖為我們的環境架構。 我們主要的設定皆在NAT Server(CentOS 6.5)上，eth0為10.10.1.1/16, Gateway為10.10.0.254，eth1為192.168.212.
-
2024年1月22日 — A route is a rule set in the kernel that is used to determine which physical network interface or gateway...
-
2024年1月18日 — A static route is nothing but a way of specifying traffic that must not go through the default gateway. O...
-
As a system administrator, you can configure static routes using the ip route command. To display the IP routing table, ...
-
Configure a Static Route. Cumulus Linux adds static routes to the FRR routing table and then to the kernel routing table...
-
Displays the current routing table with extended fields. The command is identical to the netstat -r command. route -c.
-
2023年7月19日 — In Linux, routes are essential components of the networking subsystem. They are used to determine how net...
-
2022年6月17日 — Static routing is the process of manually entering the routes to the routing table to reach a particular ...
-
-
Static route configuration can be stored per-interface in a /etc/sysconfig/network-scripts/route-interface file. For exa...
static route linux 參考影音
繼續努力蒐集當中...