前陣子我遭遇了連續兩次大停電,這地方住了已經兩年多以來第一次遇到,原本以為自己的 NAS 和伺服器都有 UPS 的保護,結果一斷電也跟著斷電,我一整個大傻眼,想...
network ups slave 相關文章
-
2021年10月31日 — I've installed and configured Network UPS Tools so that HA is Master. I'd like have my QNAP NAS monitor ...
-
Connect the UPS to the same network as the NAS. · Select Network UPS slave. · Specify the IP address of the UPS server. ...
-
2022年4月12日 — The Slave systems only run upsmon in slave mode. This is useful when you have a very large UPS that's cap...
-
2019年12月30日 — Hello Guys. After a few HOURS, I got it working. So, I got a new APC UPS with USB, plugged it to my Qnap...
-
For multiple devices, Network UPS Master Server can be used to notify the clients. QNAP NAS supports Network UPS Slave m...
-
After a UPS becomes critical, the slave will wait up to HOSTSYNC seconds for the master to set the FSD flag. If that tim...
-
When a UPS goes critical (on battery + low battery, or FSD: forced shutdown), the slaves are supposed to disconnect and ...
-
2023年1月2日 — I have the master/slave ups running great on all 4 QNAP devices but since the UPS only has 1 USB port, I c...
-
選擇[網路UPS slave]。 指定UPS 伺服器的IP 位址。 選擇下列其中一個選項。 電源中斷一段時間後關閉伺服器. 電源中斷一段時間後允許NAS 進入自動保護模式. 按一下 ...
-
2014年3月23日 — 4. 按[啟動Network UPS master ]。這個選項只在NAS以USB連接線和UPS連接的時候才會出現。 5. 輸入其他UPS slave的IP位址, ...
network ups slave 參考影音
繼續努力蒐集當中...