Linux當中沒有很多方便又有圖形化的監控工具,大部分的監控可以透過SNMP或是其他工具輔助,像我通常都使用單顆硬碟居多,硬碟的健康狀況總是得偶爾關心一下,而且...
列表文章資訊參考來源
S.M.A.R.T.
2023年10月10日 — smartctl is a command-line tool that controls the Self-Monitoring, Analysis and Reporting Technology (SMART) system built into most ATA/SATA ... ...(以下省略)
** 本站引用參考文章部分資訊,基於少量部分引用原則,為了避免造成過多外部連結,保留參考來源資訊而不直接連結,也請見諒 **
-
2014年9月24日 — Launch the Disks Utility (If you don't have it already, you can install Disks via the Software Center or ...
-
smartctl is a command line utility designed to perform SMART tasks such as printing the SMART self-test and error logs, ...
-
2020年9月26日 — In this article we see how to use the smartctl utility to check the health status of an hard drive from t...
-
2023年10月10日 — smartctl is a command-line tool that controls the Self-Monitoring, Analysis and Reporting Technology (SM...
-
2023年9月1日 — Run smartctl Command: Inside the loop, the smartctl -H $DEV command is executed for each drive device. Thi...
-
2023年4月15日 — Hard disk drive or SSD details. 1. smartctl. It's a command-line tool allows you to retrieve SMART data f...
-
2020年12月31日 — Smartctl is a command line tool in linux which is used monitor the health of hard drive and it also chec...
-
2020年5月26日 — Under Linux, you can read the SMART ... The smartctl -a /dev/DEVICENAME command will display all SMART in...
-
2019年5月2日 — All modern hard drives offer the possibility to monitor its current state via SMART attributes. These valu...
-
2020年5月5日 — smartctl is a command line tool for controlling the SMART (Self-Monitoring, Analysis and Reporting Technol...
linux hdd smart command line 參考影音
繼續努力蒐集當中...