電腦安全其實很簡單，系統更新要更新，保持良好的使用習慣，最基本的防毒還是要裝，這次限時免費的是 SecureAPlus Essentials 防毒軟體工具，最特...
Brocade G-port 相關文章
-
在Brocade 光纤交换机中， Domain ID 默认值为1，可以通过管理端口登录到交换机管理页面，点击“Switch Admin”，然后修改 ...
-
Hi, my problems with my switches brocade 8Gb Ports: 8,9,10,11 The ports are the status G-Port, How can i change the G-Po...
-
Brocade FC switch. Answer. A G-port. Is one that has negotiated as a generic or universal port. Can be used as either an...
-
Unable to configure Brocade port as E pot as it is stuck as G port. Replacing SFP and cable did not resolve; hareboot ha...
-
Use this command to enable or disable E_Port capability on a port or to lock down a port as an E_Port. E_Port capability...
-
Use this command to manage the port configuration of the GbE/10GbE ports. This command switches the port speed between 1...
-
(Trunk port, master is port #x) - 連接埠設定為中繼連接埠；主連接埠是連接埠#x ... (g) 為單位顯示錯誤計數器. 錯誤總數為上次在交換器上清除統計資料 ...
-
Brocade交换机上面看到的G-Port和U-Port是交换机端口在初始化过程中的两个中间状态，决定了这个端口初始化类型，是可以配置的。 U-Port就是交换机没有接 ...
-
A defect was identified in QLogic firmware that causes the locked G-Port issue on Brocade switches. It was fixed in QLog...
